Analog & Digital Training System M21-7000

M21-7000

DIGITAL TRAINING SYSTEM

SOLDERLESS BREADBOARD

Interconnected with 2820 tie points nickel plated contact,fitted all DIP sizes and all components with lead and solid wire AWG # 22-30 (0.3-0.8mm).It can be changed and replaced for different purpose and can be connected with demonstration panel. Therefore, it is very convenient for both teachers and students.

DC POWER SUPPLY

.Fixed DC output

+5V, 1A

.Fixed DC output

-5V, 1 A.

.Variable DC output

0V to +15V, 1 A.

.Variable DC output

0V to 15V, 1 A.

POTENTION METERS

A. Variable resistor VR1

1kΩ

B. Variable resistor VR2

100kΩ

FUNCTION GENERATOR

Frequency range

1Hz10Hz
10Hz100Hz
100Hz1kHz
1kHz10kHz
10kHz100kHz

Amplitude

Sine wave output010 Vpp variable
Triangle wave output010 Vpp variable
Square wave output010 Vpp variable
TTL mode output4 Vpp

TWO DIGITS OF 7 SEGMENT LED DISPLAY

TWO PULSE SWITCH

TWO PULSE SWITCH

2pcs pushbuttons contain switches debouncer for 
eliminating the bounce caused by switch fromopen
tocloseor fromclose toopenposition.

SIXTEEN DATA SWITCHES

SIXTEEN DATA SWITCHES

16pcs toggle switches and corresponding output point.
When switch is set at downposition,the output is
LO level; contrarily, it is to be HI level while setting at
upposition.

SPEAKER

SPEAKER

2-1/2 inch diameter, 8 ohm/0.5W to be used for load.

FOUR CHANNEL ADAPTOR

FOUR CHANNEL ADAPTOR

Both of the two banana sockets' and two BNC jacks' 
point tips are changeable. It is suitable for M21-7000 
to be connected with peripherals.

SIXTEEN BITS LED DISPLAY

SIXTEEN BITS LED DISPLAY

16 red LED's separate input terminals. The LED will be lighted up when input is at HI level ,and it will be turned off when it is at no input or at LO level.

UNIVERSAL CONNECTOR FIXED HOLDER

It reserves universal connector fixed holder on the panel 
in order to be connected with various universal connectors,
which are available

(1) Straight header 60 pin

(2) Card edge connector 2.54mm 62pin

(3) D sub25 pin connector, male & female

(4) Card edge connector 3.96mm 56pin

(5) Dip sockets connector 28 pin & 40 pin

OTHER STANDARD ACCESSORIES

(1) Power cord
(2) Pin : 10pcs
(3).User manual

DIMENSIONS & WEIGHT

258 x 95 x 334mm(WxHxD)
Approx 4.5kg